Assemblies
One measurement that fills several BoQ items, each by its own formula, kept by the firm as it measures.
A wall measured once gives its walling, its plaster and paint to both sides and its damp proof course. An assembly writes that down once: a list of items, each with a formula of the measurement's figures and the words that find its BoQ item. Put it on a measurement and its items appear under it.
Use one
- 1Open a measurement's settings (the chevron).
- 2In + Assembly: add its items... choose the assembly. Only assemblies for that kind of measurement (length, area or count) are listed.
- 3Its items appear indented under the measurement, each with its formula, quantity and BoQ item. HodariQ chooses the BoQ item of each when it finds one.
- 4Check or choose each BoQ item, then press Send all.
The letters of a formula
| Letter | A length | An area | A count (openings) |
|---|---|---|---|
| L | Its length (true length, on the centre line when set) | Its perimeter | N x W, the width of all the openings |
| A | Length x height | Its area (true area up a pitch) | N x W x H, the area of all the openings |
| H | The height typed or from a section | The depth typed | The opening's height |
| W | 0 | 0 | The opening's width |
| N | 1 | 1 | The number counted |
A formula is written as on dimension paper: figures, the five letters, + - x / and brackets, e.g. 2 x L x H, L x 0.6 x 0.9, A / 0.9. x and × both multiply and a comma is a decimal point. Nothing else is accepted, so a formula cannot do anything but work out a quantity.
How the quantity is worked out
- Each item's quantity is its formula of the measurement's figures, times the measurement's × (times), rounded to 3 decimals. It never goes below zero, and a division by zero gives zero.
- Change the measurement (its points, height, times, scale) and every item follows; rows already sent follow on the measurement sheets.
- An item's formula can be changed on the screen for this measurement only: type it in the box under the item's name.
- An item marked as a deduction in the assembly is taken off its BoQ item. If the measurement itself is ticked Deduct, each item's deduction is turned the other way: a deduction of a deduction adds.
How the BoQ item is found
For each item HodariQ looks at the BoQ items (or the VO's additions) in the same unit, and takes the one whose description holds the most of the item's words, at least half of them; between two equal ones, the shorter description. The words are the item's Find the BoQ item by words, or its name when that is empty; plurals count as the same word. When nothing matches, the BoQ item is left for you to choose.
The firm's assemblies
Configuration › Take-off Assemblies keeps them. Each has a name, Used on (Length, Area or Count / openings), a note of what to type on the measurement, and its items: Item, Formula, Unit (m, m2, m3 or No), Deduct and Find the BoQ item by. Tick Door and window openings (counts only) to have it applied at once to a door or window mark added with its size.
| Supplied | On | Items |
|---|---|---|
| Walling, plastered and painted both sides | Length | Block walling L x H; plaster and paint 2 x L x H; DPC L |
| Strip foundation on the centre line | Length | Excavation L x 0.6 x 0.9; concrete L x 0.6 x 0.2; walling to DPC L x H |
| Room: floor, ceiling and skirting | Area | Screed, floor tiles and ceiling A; skirting L |
| Room: wall plaster and paint | Length | Plaster and paint L x H |
| Door or window opening: deductions | Count | Walling N x W x H, plaster and paint 2 x N x W x H, all deducted |
| Pitched roof covering | Area | Roofing sheets A; purlins A / 0.9 |
Good to know
Change the trench sizes in the strip foundation (0.6 x 0.9) to your own before using it. Choosing an assembly twice adds its items twice: delete the extra ones. Deleting a measurement deletes its items and their rows; a wall cannot be deleted while a door is still deducted from the same BoQ items, as they would go below zero: delete the door first.
Something unclear? Ask us on WhatsApp: we answer the same day.