Start a take-off
Upload a PDF drawing, choose the BoQ or variation order it measures into, and open it ready to measure.
The take-off measures quantities on the architect's and engineer's PDF drawings, on the screen, and puts each measurement on the measurement sheet of a BoQ item. Nothing is retyped: the item's quantity is the total of its sheet, and every row on the sheet says which drawing, which page and which measurement it came from.
Which drawings work
HodariQ reads the drawing itself, not a picture of it. What it can do depends on how the PDF was made:
| The PDF | What HodariQ can do with it |
|---|---|
| Exported from CAD (AutoCAD, ArchiCAD, Revit and the like) | Everything: the scale is read from the drawing and checked against its dimensions, Snap lands on the drawn lines, Room and All Rooms find rooms, Doors & Windows reads the door and window marks, Same Symbols counts symbols, Dimension reads a written dimension, Check Dimensions adds up chains of dimensions, and a revised drawing can be compared line by line. |
| Scanned from paper (a picture inside a PDF) | Clicking only: set the scale by hand with Scale, then measure with Length, Area and Count. There are no lines or words to read, so no snapping, no rooms, no marks, no symbols and no dimension checks. A scanned revision cannot be compared with the drawing it replaces. |
| Not a PDF (DWG, JPG, a photo) | Refused: print or export it to PDF first. |
Tip
Ask the architect for PDFs exported straight from CAD, not printed and scanned. It is the difference between clicking every corner yourself and clicking once inside a room.
Start a drawing
- 1Go to Estimating › Drawings & Take-off and press New. The New drawing window opens.
- 2Drop the PDF on the box, or click browse and choose it. Replace changes the file; the bin removes it.
- 3Check Drawing, the name: it is taken from the file name (underscores and hyphens become spaces), e.g. A-101 Ground floor plan.
- 4Choose the Contract. Only contracts that are not closed are listed; the contract of your last drawing is chosen first.
- 5Under Measure into choose Bill of Quantities or Variation order, then which one. Only BoQs in Draft or Tender, and variation orders in Draft, are listed.
- 6Press Start take-off (or Enter). The drawing opens at its first page, and HodariQ reads its scale at once.
When the contract is running and you choose Bill of Quantities, the window reminds you: The contract is running: quantities usually go to a draft variation order. A contract with neither a BoQ being prepared nor a draft variation order cannot be measured into: create one first.
From a BoQ or a variation order
On a BoQ in Draft or Tender, the Measure from Drawing button at the top of the BoQ opens the same window with the contract and the BoQ already chosen. A draft variation order has the same button in its top bar. Only the PDF and its name are left to give.
Opening a drawing again
- Estimating › Drawings & Take-off lists every drawing with its revision, contract, BoQ and number of measurements. A click opens it straight in the take-off.
- On a contract, the Drawings button lists that contract's drawings only.
- In the take-off, the arrow at the top left goes back to where you came from. The drawing's name, or Details, opens its form: the revision, the zone of new measurements, the notes, and the tabs Measurements, Queries, Scales and Notes. Open Take-off goes back to the drawing.
What is kept with a drawing
| Kept | How |
|---|---|
| The PDF | As uploaded, never changed. A revision is a new drawing linked to this one. |
| One scale per page | The two points of a known length and its real length in metres. |
| Each measurement | The points you clicked, in the drawing's own units (so the zoom never matters), with its description, times, height, deduct, zone, pitch, assembly and BoQ item. |
| Queries, zones, heights | Queries belong to the drawing; zones and heights belong to the contract, so every drawing of the contract shares them. |
Every length, area and count is worked out by HodariQ from the stored points, never by your browser, so the screen, the prints and the measurement sheets always show the same figure.
Good to know
The take-off is in the Professional and Enterprise plans. The administrator switches it on in Configuration › Settings › All settings, under Features: Drawings and Take-off. The Measure from Drawing buttons are shown to QS staff.
Something unclear? Ask us on WhatsApp: we answer the same day.