Retention and its release
Retention %, its limit, materials on site, and the two releases at practical completion and the end of defects liability.
Retention is the part of each valuation the employer keeps back until the works are complete and the defects are made good. HodariQ holds it on every certificate from the contract's terms, stops it at its limit, and pays it back in two shares.
The terms on the contract
| Term | Default | What it does |
|---|---|---|
| Retention % | 10 | Share of the gross valuation held. |
| Retention limit (% of contract sum) | 5 | Retention stops growing at this share of the original contract sum (the Contract BoQ total). 0 means no limit. |
| Retention on materials on site | Ticked | Untick when the contract takes retention on work done only. |
| Released at practical completion (%) | 50 | Share of the retention held that is paid back at practical completion; the rest is paid when the defects liability period ends. |
| Defects liability period (months) | 12 | Counted from the practical completion date, it gives the date the defects liability ends. |
How it is worked out
- 1Base = the gross valuation to date, or the gross less materials on site when retention is not taken on materials.
- 2Held = Retention % × base, rounded.
- 3If a limit is set and the held amount is above it, held = the limit. The certificate line then reads Less retention 10% (limited to 42,500,000); below it, (below the limit of 42,500,000).
- 4Released % = the release chosen on this certificate (0, the practical completion share, or 100%), but never less than the previous certificate's: a release stays in force on every later certificate.
- 5Released = held × released %. Retention to date = held - released, and the line adds , after releasing followed by the amount.
Because retention is to date, a release shows up as money in the amount due: the net valuation goes up by the amount released, and the previous certificates do not.
Releasing it
The choice is Retention release on the Certificate tab of Details: No release, Practical completion: first share or End of defects liability: the rest. HodariQ proposes it on each new valuation:
- After practical completion is recorded on the contract, the next valuation proposes Practical completion: first share (once; the release then carries on by itself).
- On a valuation dated on or after the end of the defects liability period, it proposes End of defects liability: the rest.
- The Final Certificate always releases all of it.
At Submit and at certification HodariQ checks the release: any release needs practical completion recorded on the contract first; the rest needs the practical completion date and the defects liability months on the contract, and a valuation dated on or after the day the defects liability ends.
The contract shows the retention held on the last certified certificate. The second half is paid by a certificate dated after the defects liability period, normally the Final Certificate (see Contracts › Completion and closing).
Good to know
The Final Certificate releases all the retention, so it can only be submitted once the defects liability period has ended.
Something unclear? Ask us on WhatsApp: we answer the same day.